Controls & Connectors ( Right Side ) - Yaesu FTA-450L Operating Manual

MIC/SP Jack

You may connect the supplied SCU-15 Headset
Adapter Cable, the optional SSM-10A Speaker/
Microphone or the optional SEP-11A Earphone to
this jack. To use this jack, you must first remove the
cover from the transceiver body.
Do not allow the FTA-450L to get wet
while the MIC/SP cover has been removed.
DATA Jack

You may connect the optional USB cable to this
jack. To use this jack, you must first lift the rubber
cover away from the transceiver body.
Do not allow the FTA-450L to get wet
while the rubber cover is removed.
EXT DC Jack

When an external 9.5- to 10.5-Volt DC power
source is available, you may connect the SDD-12
Cigarette Lighter DC/DC Converter here. To use
this jack, you must first lift the rubber cover away
from the transceiver body.
1) Do not allow the FTA-450L to get wet
while the rubber cover is removed.
2) Do not connect any accessory unap-
proved by YAESU to supply DC power.
10
C & C
ontrols onneCtors
( r )
s
Ight Ide
DATA
EXT
DC
FTA-450L O
perATing

PTT

SQL

M
AnuAL