Specifying The Auto Focus Area - Casio EXILIM EX-FH25 User Manual

Specifying the Auto Focus Area (AF Area)
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always "
1.
In the REC mode, press [8].
2.
Use [8] and [2] to select the fourth control panel option from the
bottom (AF Area).
3.
Use [4] and [6] to select the setting you want and then press [SET].
This mode takes readings of a small area in the center of the
Spot
U
image. This setting works well with focus lock (page 54).
You can move the focus frame by using [8], [2], [4], and [6] to
move the focus point and then pressing [SET]. To change the focus
Free
—
point position, select "— Free" again and then use [8], [2], [4]
and [6] to select the position you want.
When you half-press the shutter button while this setting is
O
Tracking selected, the focus frame will follow the movement of the subject.
— Free"
"
Focus point
• Tracking" cannot be used in combination with the following features.
" O
Prerecord CS, some BEST SHOT scenes (Move Out CS, Move In CS, Multi-
motion Image, Lag Correction, Expression CS, Baby CS, Child CS, Pet CS,
Sports CS)
• "— Free" cannot be selected for the AF area while Face Detection is enabled.
Spot" or Tracking"
" U " O
*
[SET]
45
Spot".
U
Focus frame
Focus frame
Snapshot Tutorial