Viewing Snapshots And Movies On A Tv Screen - Casio EXILIM EX-FH25 User Manual

Viewing Snapshots and Movies on a TV Screen

1.
Use the AV cable that comes with the camera to connect it to the TV.
Yellow
TV Video
AUDIO IN jack (white)
VIDEO IN jack (yellow)
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will
be able to see the metal part of the connector as shown in the
illustration.
• Make sure that the camera is turned off before plugging in or
unplugging the cable. Check the user documentation that
comes with the TV for information about requirements before
plugging into or unplugging from the TV.
2.
Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
3.
Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera's monitor screen.
• Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV
cable is connected.
• You also can change the aspect ratio of the screen and the video output
system (page 155).
4.
Now you can display images and play back movies as you normally do.
White
Audio
Terminal cover
110
AV cable (bundled)
USB/AV port
Making sure that the 6 mark on the
camera is aligned with the 4 mark of the
AV cable connector, connect the cable to
the camera.
Viewing Snapshots and Movies