Selecting A Focus Mode; Specifying The Auto Focus Area - Casio EX-ZR62 User Manual

Selecting a Focus Mode (Focus)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * Focus
For details, see the Control Panel procedure on page 44.
Specifying the Auto Focus Area (AF Area)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * AF Area
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always "U Spot".
Settings Description
The camera automatically determines the focus area on the
š Intelligent
screen and focuses there (intelligent AF).
This mode takes readings of a small area in the center of the
U Spot
image. This setting works well with focus lock (page 45).
When you half-press the shutter button while this setting selected,
the camera will select the optimum Auto Focus area from among
nine possible areas. The focus frame of the area where the
camera focuses will be displayed in green.
The steps below can be used to shift the position of the nine Auto
Focus areas.
I Multi



When you half-press the shutter button while this setting is
O Tracking
selected, the focus frame will follow the movement of the subject.
• Face detection (page 104) operates automatically.
While in record standby, press [4] or [6].
Use [4], [6], [8], and [2] to shift the focus areas.
• Rotating the zoom controller will cause only the center focus
area to become selected.
When the Auto Focus area is in the position you want, press
[SET].
102
Advanced Settings (REC MENU)