Advertisement
D. Miscellaneous Section
Important- Illustrations show shed with Cedar
and Metal Roof Panels and assembly is
interchangeable.
45.
Attach Bottom Skirting pieces around the base of the shed.
Skirting will hide floor framing. Gaps on side will be covered by
Wide Trim pieces later. Start with Front Skirting pieces first and
attach with 4 - 1 1/2" Finishing Nails per piece above the exposed
floor runner. Front Skirting pieces should end at the notch in the
floor runner. Complete side and rear skirting the same way.
Expert Advice:
When installing trim, sort pieces according to color and pieces that are most
pleasing to the eye. Start with least visible side of shed and use the least desirable pieces first. Install
trim to most visible side of shed as your skill installing trim improves.
Toll Free 1-888-658-1658
Hardware
N1 - 1 1/2" Finishing Nails
x 44 total
www.outdoorlivingtoday.com
Page 27
Parts
Bottom Skirting Side
(1/2" x 4 1/2" x 45 1/4") x 4
Bottom Skirting Front
(1/2" x 4" x 43 1/2") x 3
Bottom Skirting Rear
(1/2" x 4 1/2" x 34 1/8") x 4
sales@outdoorlivingtoday.com
Advertisement
