Advertisement
D. Miscellaneous Section
Important- Illustrations show shed with Cedar
and Metal Roof Panels and assembly is
interchangeable.
55.
Attach Bottom Skirting - Bevel around the base of the shed.
Bevel is thicker at butt and thinner at top of board. Skirting will hide
floor framing. Gaps on side will be covered by Wide Trim pieces
later. Start with Front and Rear Skirting pieces first and attach with
4 - 1 1/2" Finishing Nails per piece.
Expert Advice:
When installing trim, sort pieces according to color and pieces that are most
pleasing to the eye. Start with least visible side of shed and use the least desirable pieces first. Install
trim to most visible side of shed as your skill installing trim improves.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 31
Thicker at Butt
Parts
Bottom Skirting - Bevel
(3/4" x 4 1/2" x 45 1/4") x 10
Hardware
N1 - 1 1/2" Finishing Nails
x 40 total
sales@outdoorlivingtoday.com
Advertisement
