Elite Screens Spectrum Tab-Tension 2 CineGrey 3D Series User Manual

________________________________________________________________________________________
Thank you for choosing the Spectrum Tab-Tension 2 CineGrey 3D® Series projection screen! The
screen material included is our award winning GREENGUARD GOLD and ISF Certified CineGrey 3D®
which is a front projection material, precisely formulated for environments with minimal control over
room lighting. It was designed to enhance picture brightness, offer accurate color fidelity, and improve
contrast levels. The CineGrey 3D® is best for family rooms, educational facilities, conference rooms,
house of worship or any applications in which incident light is a factor.
In order for the CineGrey 3D® to maintain its projection qualities and optimum performance please
refer to the list below for proper maintenance and cleaning.
•
Use a dry microfiber cloth to remove dust from the screen's surface.
•
When cleaning, use a damp microfiber cloth with warm water to remove any marks.
•
Never rub or apply pressure when cleaning the surface.
•
Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
•
In order to avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils
or any other sharp or abrasive objects.

Important Safety Precautions

Make sure to read this user's guide and follow the procedures below prior to screen operation.
• Please retain this user's guide for future reference.
• To avoid damaging the unit, do not use with any accessories/triggering sources not
recommended or specified by the manufacturer.
• Handle the unit carefully during transportation to avoid any damages.
• To ensure safe and reliable operation, direct connection to a` properly grounded power source is
advised.
• The power outlet supplying power to the unit should be close to the unit and easily accessible.
• Do not install the unit on uneven or inclined surfaces.
• Do not hang any objects on the power cord and position the cord properly to avoid tripping over
it.
• Never overload the power cord to prevent an electric shock or fire due to a loose contact or a
short circuit.
• There are no user serviceable parts in this unit. Do not attempt to disassemble this unit by
yourself. No one except authorized technicians can open the casing and make repairs to this unit.
• Make sure that the power source this unit is connected to has a continuous power flow.
• If there is need for use of an extension cord, make sure the cord has an equal rating as the
electrical device to avoid overheat.
• Do not handle the power cord when your hands are wet or your feet are in contact with water.
• Unplug the power cord during extreme weather conditions such as heavy rain, gusty winds,
thunder or lightning.
• Avoid direct Sunlight, moisture/rain to this unit.
• Do not mount near high temperature environments to prevent this device from overheating.
• Fully disconnect from the power supply when the unit is not in use for a long period of time, as
should be done with any other electrical household appliance.
• To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is
obvious damage or if there are any evident broken parts.
Rev.03302022JA
Spectrum Tab-Tension 2 CineGrey 3D® Series
Ceiling/Ambient Light Rejecting (CLR®/ALR) Material
Electric/Motorized Tab-Tensioned Projection Screen
1
User's Guide
www.elitescreens.com