Elite Screens Manual Series User Manual

Elite Screens Manual Series User Manual

Manual-pull down screen
Hide thumbs Also See for Manual Series:

Advertisement

Manual-Pull Down Screen
Elite Manual Series
USER'S GUIDE
Rev 1.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Manual Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elite Screens Manual Series

  • Page 1 Manual-Pull Down Screen Elite Manual Series USER’S GUIDE Rev 1.1...
  • Page 2 Installation 1. Mark the area from the screen mount end cap hole to the wall. Then mount the screen onto the wall (Fig 1) • Locate stud on wall or and mount the screen on the desired location. • If the stud cannot be found on the dry wall, we recommend using hollow wall anchors (can be typically purchased at a local hardware store) for screens weighing less than 40lbs.
  • Page 3 Using the screen 1. Always pull down the screen in a 90-degree vertical motion and do not allow the screen to touch the screen case when the screen comes down. (Fig 3) Fig. 3 2. Pull down the screen from the rope or from the handle only in a 90-degree down. (Fig.

Table of Contents