Snmp - E-Lins H685 Series User Manual

H685 User Manual

3.5.5 SNMP

 Enable SNMP: Enable SNMP feature
 Remote Access: Allow remote access SNMP. If it is unchecked, only LAN subnet can access
SNMP.
 Contact: Set the contact information here
 Location: set router's installation address.
 Name: Set the router's in SNMP
 Port: SNMP service port, the default value is 161.
 Trap receiver IP: the IP list of SNMP trap receiver.
 Router reboot trap: send trap when router boots up.
 Module reboot trap: send trap when cell module boots up.
 Trap type: SNMPv1 or SNMPv2 trap.
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com www.e-lins.com