Static Routes - E-Lins H685 Series User Manual

 Netmask: 24 means net mask 255.255.255.0, 32 means 255.255.255.255, the illegal value is
from 1 to 32.
 RFC1918 filter: reject requests from RFC1918 IPs to public server IPs.
 Enable lock account: if web account login failed, it will not be allowed to login again in a period
even use correct username and password.
 Max retries: max retries is reached, web account will be locked.
 Lock time: web account is locked for Lock time.

3.6.9 Static Routes

 Interface: You can choose the corresponding interface type.
 Target: the destination host IP or network.
 IPv4-Netmask: the destination IP mask.
 IPv4-Gateway: IP address of the next hop.
 Metric: used by router to make routing decisions.
 MTU: maximum transmission unit
 Table: the route table ID, the default value is 254, valid table ID 1-254.
Notice:
Gateway and LAN IP of this router must belong to the same network segment.

If the destination IP address is the one of a host, and then the Netmask must be

255.255.255.255.
If the destination IP address is IP network segment, it must match with the Netmask. For

example, if the destination IP is 10.0.0.0, and the Netmask is 255.0.0.0.
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com
H685 User Manual
www.e-lins.com