Dhcp Server - E-Lins H685 Series User Manual

H685 User Manual
 Bridge interfaces: LAN bridges wired-LAN and WiFi in a same LAN subnet.
 Enable STP: enable Spanning Tree Protocol on LAN. The default value is unchecked.

3.6.4.3 DHCP Server

 Ignore interface: if it is unchecked, Disable DHCP on LAN.
 Start: Lowest leased address as offset from the network address.
 Limit: Maximum number of leased addresses.
 Leasetime: Expiry time of leased addresses, minimum is 2 minutes (2m). 12H means 12
hours.
Example:
With the parameters in the picture above, the Start is 100, and the Limit is 150.
This means the router assigns IP range xxx.xxx.xxx.100~xxx.xxx.xxx.250 to the connected
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com www.e-lins.com