3.5.4 SNMP
Enable SNMP: Enable SNMP feature
Remote Access: Allow remote access SNMP. If it is unchecked, only LAN subnet can access
SNMP.
Contact: Set the contact information here
Location: set router's installation address.
Name: Set the router's in SNMP
Port: SNMP service port, the default value is 161.
Get Community: The username for SNMP get. The default value is public. SNMP get is
read-only.
Get Host/Lan: The network range to get the router via SNMP, default we set all as 0.0.0.0./0
Set Community: The username for SNMP set. The default value is private. SNMP set is
read-write.
Set Host/Lan: The network range to set the router via SNMP, default we set all as 0.0.0.0./0
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com
H820QO User Manual
www.e-lins.com