Configuring Vdi Iii Using Vci Manager; Versions - Bosch SAIC VDI III Operating Instruction

en 12 | VDI III | Operation
5.3.3

Configuring VDI III using VCI Manager

In order to configure VDI III for the network
connection, VDI III must be connected to a
computer running VCI Manager by USB. The VCI
Manager icon displayed on VDI III will indicate
the communication method to be used when
<Connect> is clicked.
Sym- Description
bol
VCI Manager connects to VDI III by way of
the USB port
VCI Manager connects to VDI III by way of
the Ethernet port
VCI Manager connects to VDI III by WLAN
No wireless point-to-point connection is set
up. Use the USB connecting cable to connect
VDI III to the computer to set up the connec-
tion.
The wireless adapter in the computer and
the one in the diagnostic device are incom-
patible with each other.
VCI Manager is connected to the VDI III
The following steps are required to configure
VDI III.
1. Double-click the VCI Manager icon on the
computer's desktop to launch the "VCI Mana-
ger" software.
2. Select VDI III in "VCI Explorer."
3. Click the <Connect> button to connect to
the selected VDI III by USB.
"
The VDI III will be displayed with a green
checkmark, indicating that VCI Manager" is
controlling this VDI III.
4. Click the <Show details> button to see
details about the selected VDI III.
i
If VDI III is connected to another computer
in the network, it will still be detected by
VCI Manager but will not be available for
connection.
|
1 689 989 458 2020-01-01
i
If VDI III is connected to the computer by
USB, the VCI Manager functions in all tabs
are available. If VDI III is not connected by
USB, the functions in the tabs "Network se-
tup" and "VDI III update" cannot be selected.
5.3.4 Checking the computer and VDI III
software versions
i
Ensure that the "VCI Manager" software ver-
sion installed on your computer is the same
as the software version installed on VDI III in
order for VDI III to operate properly. Check
the software versions as follows.
1. Connect VDI III to the computer by USB
connecting cable.
2. Double-click the VCI Manager icon on the
computer's desktop to launch the "VCI Mana-
ger" software.
3. Select VDI III in "VCI Explorer."
4. Click the <Connect> button to connect to
the selected VDI III by USB.
5. Use "Help" to see details about the software

versions.

Robert Bosch GmbH