Invacare LiNX DLX-ACU200 Remote User Manual page 25

The table below describes the fault indication, and a few possible actions that can be taken to rectify the problem. The
actions listed are not in any particular order and are suggestions only. The intention is that one of the suggestions may help
you clear the problem. If in doubt, contact your provider.
Flash code Fault description
1 Remote fault
2 Network or configuration fault
3
Motor 1
4
Motor 2
5
Left magnetic brake fault
1608055-C
1 fault
1 fault
Possible action
• Check cables and connectors.
• Contact your provider.
• Check cables and connectors.
• Recharge the batteries.
• Check charger.
• Contact your provider.
• Check cables and connectors.
• Contact your provider.
• Check cables and connectors.
• Contact your provider.
• Check cables and connectors.
• Check left magnetic brake is engaged.
• Refer to the chapter "Pushing the mobility device in
freewheel mode" in the user manual of your wheelchair.
• Contact your provider.
Troubleshooting
25