Mode Button - Invacare LiNX DLX-ACU200 Remote User Manual

Invacare® LiNX
mobility device the remote of the user, that wants to stop
the mobility device must be remote-in-charge. If the remote
that you want to perform an emergency stop on is not
remote-in-charge, you must request control/ to be in-charge
of the mobility device first. See 4.1 Requesting control of
the mobility device, page 14.
1.
Press the button.
If the remote-in-charge has been restricted, the
mobility device does not perform an emergency stop.
Using lock function
Lock function prevents unintentional use of the system
when the system is temporarily not required. See 4.5 Lock
Mode, page 18.
Disabling connectivity system-wide
This chapter applies only for compact remote
modules DLX-CR400 and DLX-CR400LF.
16
Connectivity gives access to more profiles. Connectivity can
be disabled.
1.
Press and hold button for three seconds during
powering up.
The connectivity indicator and status LED pulse slowly
for five seconds, then connectivity indicator LED
switches off.
Interrupting or waking up from sleep
Before the system goes to sleep there is a transition period
during which you can interrupt the system from going to
sleep.
1.
Press the button.
Or:
1. Move the joystick.

4.4 Mode button

Mode button on attendant
control unit
Mode button on compact
remote
1608055-C