Advertisement
5-4-2. Partial Blur (WIDE side)/Curvature Adjustment
Adjusting Procedure
1. Increase or decrease the thickness of the adjustment shim to
adjust the partial blur/curvature.
Partial blur: Set the zoom to the WIDE end, Change the thick-
ness of the side where blurring occurs.
Curvature: Change the thickness of the whole.
Front focus: Make the washer thicker.
Rear focus: Make the washer thinner.
adjustment shim
2. Perform the check and adjustment repeatedly until the partial
blur/curvature is resolved.
Note: If the partial blur/curvature cannot be resolved even after
the adjustment, replace the mount assy.
ADJUSTMENT SHIM
Thickness
(mm)
0.050
0.075
0.100
0.125
0.150
0.200
0.250
0.300
5-21
SEL24105G
Part No.
Color
4-698-024-01
Red
4-698-024-11
Glossy Black
4-698-024-21
Glossy Silver
4-698-024-31
White
Transparent
4-698-024-41
(Black Adhesive Tape)
4-698-024-51
Transparent
4-698-024-61
Matte Black
4-698-024-71
Milky White
Advertisement
