Advertisement
5-1-2. Adjustment/Check Procedure Flow Chart
After the parts replacement
5-2-2. Optical axis
5-3. Resolving power
check (Note 1)
Lens adjustment program
5-5. E-Mount Lens Adjustment
(1) Lens Device (S)
(2) Lens Device2 (S)
(3) Lens Device3 (S)
(4) Steady Hall (S)
(5) Flange Back (S)
(6) F Number (S)
(7) Focus Shift Adjustment
(8) Lens Sleep
5-2-3. Optical axis
adjustment
NG
check
OK
Resolving power adj.
NG
OK
END
NO
Perform the
YES
adjustment, it does not
improve the
symptoms.
NO
Perform the
YES
adjustment, it does not
improve the
symptoms.
Note 1: Perform the Resolving Power Check by either
"5-3-2. Projective Resolving Power Check"
"5-3-3. Photographic Resolving Power
Note 2: When it does not improve the symptoms even
adjust the Partial Blur (TELE side), please re-
place it.
Note 3: When it does not improve the symptoms even
adjust the Partial Blur (WIDE side)/Curvature,
please replace it.
5-2
SEL24105G
Replace the 3-5th group
assy
Replace the 1st group
assy (Note 2)
Replace the mount
assy (Note 3)
Check".
or
Advertisement
