Shown degraded if the antenna is not vertical . This guide will help you properly install Wilson Electronics Direct Connect Signal Boosters in both in-vehicle and in-building applications . It is important to read through all of the installation steps for your particular application prior to installing any equipment.
Page 3
Booster. The external adapter is cell phone/data card-specific and may be purchased through a local retailer . Refer to Wilson Electronics Adapter Guide to identify the right Select a location to install the Signal Booster that is away from excessive heat, direct adapter for your cell phone or cellular data card .
2 or more bars . Note: Many phones by Wilson Electronics . Wilson Electronics shall, at its option, either repair or replace the product . Wilson Electronics will pay for delivery of the repaired or replaced product back to the original take up to 20 seconds to reset the bar indicator.
Signal Booster Specifications Dual-Band 800/1900 MHz Specifications Model Number / Part Number 2B1401 / 811200, 811201, 811206, 811207 & 811209 Connectors FME-Male Impedance (input/output) 50 ohms Dimensions 5 x 5 .4 x 1 .4 inch or 14 x 10 .8 x 3 .5 cm Weight 1 .32 lbs or 0 .6 kg...