Siemens SIMATIC NET SCALANCE W788-x Operating Instructions Manual page 7

Table of Contents

Advertisement

Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they
are available and that the latest product versions are used. Use of product versions that
are no longer supported, and failure to apply the latest updates may increase customer's
exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security
RSS Feed under
https://www.siemens.com/cert (https://www.siemens.com/cert).
Firmware
The firmware is signed and encrypted. This ensures that only firmware created by
Siemens can be downloaded to the device.
The firmware is available on the Internet pages of the Siemens Industry Online Support:
(https://support.industry.siemens.com/cs/de/en/ps/15860/dl)
Note on firmware/software support
Check regularly for new firmware/software versions or security updates and apply them.
After the release of a new version, previous versions are no longer supported and are not
maintained.
Device defective
If a fault develops, send the device to your SIEMENS representative for repair. Repairs
on-site are not possible.
Decommissioning
Shut down the device properly to prevent unauthorized persons from accessing
confidential data in the device memory.
To do this, restore the factory settings on the device.
Also restore the factory settings on the storage medium.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the
WEEE directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a
certified disposal company for electronic scrap or your Siemens contact (Product return
(https://support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
SCALANCE W788-x / W748-1
Operating Instructions, 03/2022, A5E03678333-17
Introduction
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic net scalance w748-1

Table of Contents