Siemens SIMATIC NET SCALANCE W788-x Operating Instructions Manual page 45

Installing on the DIN rail
The following figure shows the SCALANCE W7x8 mounted on a DIN rail.
Follow the steps outlined below:
1. Place the device on the upper edge of the DIN rail (position A).
2. Pull the spring-mounted DIN rail slider (position B) down and press the device against
the DIN rail until it locks in place.
Figure 5-5
SCALANCE W788-x / W748-1
Operating Instructions, 03/2022, A5E03678333-17
Installing on a DIN rail
Installation and removal
5.6 Installing on a DIN rail
45