Connect Wiring And Power Up - Emerson Rosemount 2110 Quick Start Manual

Quick Start Guide
4

Connect wiring and power up

The Rosemount 2110 meets IP66 and IP67 weatherproof ratings when
correctly assembled with the supplied connector and suitable cable. Ensure
seals are in place to maintain the weatherproof ratings.
Procedure
1.
2. Remove the plug cover and cable gland.
Keep the fixing screw and screw seal safe.
3. Pull the cable through the cable gland.
Cable diameter: 0.24 to 0.31 in. (6 to 8 mm)
4. Connect the cable wires.
Table 3-3
electronics option.
5. Ensure proper grounding.
6. Re-fit the plug cover and tighten the cable gland.
18
Verify the power supply is disconnected.
A
A. Fixing screw and screw seal
A
A. PG9 cable gland provided
and Table 3-4 show the wiring connections for each
March 2022
Rosemount 2110 Level Switch