Outdoor Unit Installation; Selecting An Installation Location - MrCool DIY E Star Series Installation & Owner's Manual

Outdoor Unit Installation

Fig. 5.1
Installation Instructions –
Outdoor Unit
Step 1: Selecting an Installation Location
Before installing the outdoor unit, you must
choose an appropriate location. Use the following
guidelines to help you select an appropriate
location.
Proper installation locations should meet
following guidelines:
Meets all spatial requirements shown in
in the illustration above (Fig. 5.1)
Good air circulation and ventilation
Firm and solid location that can support
the unit and will not cause vibration
Noise from the unit will not disturb
others
Protected from prolonged periods of
exposure to direct sunlight or rain
If installed in an area where snowfall is
expected, take appropriate measures to
prevent ice buildup and coil damage
Indoor Unit Installation
Minimum Clearance
above unit:
24 in (60 cm)
DO NOT install unit in the following
locations:
mrcool.com
Minimum Clearance
between the back of
the unit and wall:
**Ground Installed:
12 in (30 cm)
**Bracket Installed:
Near an obstacle that will block air inlets
and outlets.
Near a public street, crowded areas, or
where noise from the unit will disturb
others.
Near animals or plants that could be
harmed by hot air discharge.
Near any source of combustible gas.
In a location that is exposed to large
amounts of dust.
In a location exposed to excessive amounts
of salty air.
In a location that exposes the unit to
large amounts of forced water.
5
6 in (15 cm)
Page 20