Table of Contents
Advertisement
5. Advanced Setup
NAT
You can configure the Virtual Server, Port Triggering, and DMZ Host when NAT is
enabled.
Virtual Servers
A virtual server allows you to direct incoming traffic from the WAN side to a specific
IP address on the LAN side. Click on the Add button to add a virtual server.
Figure 5-8.
You can select a Service or make new one. Enter the Server IP Address, then click
on Save/Apply to submit your configuration.
Figure 5-9.
5-6
NAT Virtual Server Setup
Virtual Server Add Screen
September 2005
6212-A2-GB23-00
Advertisement
Table of Contents
