Iii.control Setting - ProKlima JHS-A018 -12KR2/C-W Operating Instructions Manual

Exhaust Pipe Assembly
Window Sealing Plate Assembly
III. Control Setting
When the machine is powered on for the first time, the buzzer will play power-on music, and
then the machine will get into standby status.
1: Power Key: press the key to turn on and turn off the machine. In the case of power on, press
the key to turn off the machine; in the case of power off, press the key to turn on the machine.
2: Mode Selection Key: In the case of power on, press the key to switch between cooling
→ dehumidifying mode.
fan
3:Sleep Mode:
In the cooling Mode,Press the UP and Fan Key to turn on the sleep mode,then the unit will
work on Energy-Saving and quiet type.
4:Up Key and Down Key: press the two keys to change the setting temperature or setting time,
operate as follows:
While setting temperature, press up key or down key to select the required temperature (not
available in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
5:Wind Speed Selection Key:
In cooling and fan mode, press the key to select high,low wind speed operation. But limited by
anti-cold conditions, under certain conditions, it may not run according to the set wind speed.
In dehumidifying mode, pressing the key is invalid, and the fan will forcibly choose low wind speed
operation.
排热管
30
→