Advertisement
FIXING THE OVEN
Introduce the oven into the furniture opening and fix it with 2 screws (not supplied) as figure 5.
Before fixing the 2 screws, check the 2 plastic bushes are correctly in place into the fixing
holes (the bushes are already fitted on the product and must lie flat).
It is essential that the oven rests on a surface which will support its weight, as the screw
fixing is only complementary.
Note:
It is essential that when installing your oven adequate air circulation is allowed for within the
installation. See figures 1, 2, 3 and 4.
Inadequate air circulation may greatly impair the performance of your oven and may effect
adjacent cabinets due to an increase in temperature.
Caution!
Do not lift this oven by the door handle.
Adjust the hinges of furniture doors adjacent to the oven to allow a 4-5 mm gap between
the furniture door and the oven frame.
L
10
10
Figure 6
Figure 5
IMPORTANT (only for the models NSM 9 ..,
NSM 11 ..): When handling the oven, take
care not to damage the door sensor lever
"L" (fig. 6) (near the top left corner of the
oven seal).
Advertisement
