Advertisement
TELESCOPIC SLIDING SHELF SUPPORTS
(Models NSM 11 XL and NSM 11 NL only)
The telescopic sliding shelf supports make it safer and easier to insert and remove the
oven shelf and tray.
They stop when they are pulled out to the maximum position.
Important! When fitting the sliding shelf supports, make sure that you fit:
■
The slides to the top wire of a rack. They do not fit on the lower wire.
■
The slides so that they run out towards the oven door.
■
Both sides of each pair of shelf slides.
■
Both sides on the same level.
To fix the sliding shelf supports onto the side racks:
■
Fit the sliding shelf supports onto the top wire of a rack and press. You will hear a click
as the safety locks clip over the wire.
To remove the telescopic sliding, operate in reverse order.
Cleaning the sliding shelf supports:
■
Wipe the supports with a damp cloth and a mild detergent only.
■
Do not wash them in the dishwasher, immerse in soapy water, or use oven cleaner
on them.
18
18
Left
Tab
Clip
Left
Right
Tab
Clip
Right
Figure 12
Advertisement
