Toro Groundsmaster 3320 Series Installation Instructions Manual page 8

Figure 10
1. Control-valve handle
2. Pivot lever
20. Install the control knob to the handle
21. Install the fuel-tank fasteners.
22. Install the seat base and the seat.
3. Valve spool
4. Control knob
(Figure 10).
2
Installing the Frame Assembly
Parts needed for this procedure:
1 Frame assembly
1 Left hopper-mounting bracket
4 Bolt (#10)
4 Locknut (#10)
4 Bolt (5/16 x 1-1/4 inch)
4 Locknut (5/16 inch)
1 Right hopper-mounting bracket
1 Coupler bracket
4
Bolt (3/8 x 1 inch)
2 Lockwasher (3/8 inch)
2 Locknut (3/8 inch)
1 Rear hopper-mounting bracket
2 Strap
2 Bolt (1/2 x 1-1/4 inches)
2 Bolt (1/2 x 1-1/2 inches)
2 Bolt (1/2 x 3-1/2 inches)
4 Flat washer (1/2 inch)
4 Locknut (1/2 inch)
2 Lock washer (1/2 inch)
1 Disconnect pin
1 Long, welded mounting pin
1 Short, welded mounting pin
2 Self-tapping screw (1/4 x 3/4 inch)
Procedure
1. Remove the hairpin cotter and pin securing the right
side of the ROPS to the pivot bracket
8
(Figure 11).