Toro Groundsmaster 3320 Series Installation Instructions Manual page 7

1. Hydraulic hoses
Note: Make sure that the 2 hydraulic hoses are
oriented so that they point straight out the left side of
the control valve as shown in
the chance of the hoses interfering with the fuel tank.
1. Hydraulic hoses
15. Install the protective sleeve over the hoses
Note: The remainder of the hose installation will be
complete after you install the hopper frame.
16. Remove the drain pan from under the machine.
17. Remove the knock-out plug, under the decal in the
lower control panel
Figure 6
2. Protective sleeve
Figure 7. This eliminates
Figure 7
(Figure
(Figure 8 and Figure 9).
1. Knock-out plug location
1. Knock-out plug
18. Mount the control-valve handle to the valve spool with
a clevis pin and cotter pin.
6).
19. Mount the pivot lever to the handle with a socket-head
screw and a locknut
7
Figure 8
Figure 9
(Figure 10).