Labnet Rocker 35 EZ Instruction Manual

Labnet Rocker 35 EZ Instruction Manual

Advertisement

Quick Links

Labnet Rocker 35 EZ
Instruction Manual
Catalog Numbers:
S2035-E
S2035-E-230V
S2035-DE
S2035-DE-230V

Advertisement

Table of Contents
loading

Summary of Contents for Labnet Rocker 35 EZ

  • Page 1 Labnet Rocker 35 EZ Instruction Manual Catalog Numbers: S2035-E S2035-E-230V S2035-DE S2035-DE-230V...
  • Page 2: Table Of Contents

    Table of Contents 1.0 Introduction ..................1 2.0 Specifications .
  • Page 3: Introduction

    1.0 Introduction The Labnet Rocker 35 EZ is a general purpose adjustable tilt rocker with digital time and speed controls. The tilt angle is easily adjustable without tools using the knob on the right side of unit. This reliable rugged unit is designed for extended use and comes with a 5-year warranty.
  • Page 4: Installation Of The Rocker

    3. TIME knob: Sets the Time of the rocker 4. HOLD yellow signal light: Illuminates when the rocker is set for continuous running 5. START/STOP button: START or STOP rocking 6. RUN green signal light: Illuminates when the rocker is running LABNET ROCKER 35 EZ...
  • Page 5: Operation

    5.2 Operation 1. Turn POWER switch ON (it should illuminate). 2. Set SPEED knob to desired value. 3. Set TIME knob to desired value or to HOLD - continuous operation (yellow signal light HOLD must illuminate). 4. Press START/STOP key to start the rocking operation. 5.
  • Page 6: Installation Of The Double Platform

    7.0 Troubleshooting Should you have a question about the operation of the Labnet Rocker 35 EZ or if service is required, contact your Corning representative. Do not send in a unit for service without first calling to obtain a repair authorization number. Should the unit require return to Corning for service, it should be properly packaged to avoid damage.
  • Page 7: Limited Warranty

    9.0 Limited Warranty Corning Incorporated (Corning) warrants that this product will be free from defects in material and workmanship for a period of five (5) years from date of purchase. CORNING DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.
  • Page 8 To request certificates, please contact us at www.labnetlink.com. Warranty/Disclaimer: Unless otherwise specified, all products are for research use or general laboratory use only.* Not intended for use in diagnostic or therapeutic procedures. Not for use in humans. These products are not intended to mitigate the presence of microorganisms on surfaces or in the environment, where such organisms can be deleterious to humans or the environment.

This manual is also suitable for:

S2035-eS2035-e-230vS2035-deS2035-de-230v

Table of Contents