Lens File Screen - Panasonic AJ-HDC27HP Menu Information

Setting menu screens

LENS FILE screen

The lens files are stored into the unit's internal
memory and read from the memory on this screen.
The white shading data and flare adjustment data are
stored together as a lens file.
Variable
Item
range display
FILE SELECT 1 USER
: ENG
8
S U F E
==
READ USER
ENG
==
WRITE USER
ENG
==
RESET ALL USER
ENG
¢¢¢¢¢¢
TITLE 1: - USER
¢¢¢¢¢¢
TITLE 8: ENG
<Note>
When RESET ALL is executed, the white shading adjustment value
and the flare setting value are reset to the factory default values.
LENS FILE (CARD R/W) screen
The contents of the eight lens files recorded in the
internal memory are written on the SD memory card
on this screen. Alternatively, the lens files written on
the SD memory card are read into the internal memory
on this screen.
Variable
Item
range display
CARD FILE 1 USER
SELECT : ENG
8
S U F E
==
READ USER
ENG
==
WRITE USER
ENG
¢¢¢¢¢¢
TITLE 1: - USER
¢¢¢¢¢¢
TITLE 8: ENG
The underlining in the variable range column indicates the setting in
the preset mode.
108
FILM (CAM) MAIN MENU 3 (continued)
VF
Remarks
For selecting the number
of the file to be read or
written.
For reading the lens files.
For writing the lens files.
For returning all the data
from lens files 1 to 8 to the
factory setting.
For enabling titles each
consisting of a maximum
of 12 characters to be set
for the files.
VF
Remarks
For selecting the number of
the file to be read from the
SD memory card or written
on the SD memory card.
For reading lens files from
the SD memory card.
For writing lens files to the
SD memory card.
For enabling titles each
consisting of a maximum
of 12 characters to be set
for the files.
GENLOCK/IRIS screen
The genlock and iris control settings are performed on
this screen.
Variable
Item
range display
H PHASE 00 USER
COARSE : ENG
15
H PHASE FINE 00 USER
: ENG
64
A. IRIS LEVEL 000 USER
: ENG
050
:
100
S C U F E
A. IRIS 000 USER
PEAK/AVE : ENG
050
:
100
S C U F E
A. IRIS MODE NORM1 USER
NORM2 ENG
CENTR
S C U F E
S. IRIS LEVEL 000 USER
: ENG
080
:
100
S C U F E
IRIS GAIN CAM USER
LENS ENG
S C U F E
IRIS GAIN 01 USER
VALUE : ENG
06
:
10
S C U F E
VF
Remarks
For coarsely adjusting the
H phase during genlock.
For finely adjusting the H
phase during genlock.
For setting the auto iris
target level.
The brightness (iris) is
controlled using this value.
The higher the value
selected, the higher the
brightness.
For setting the ratio
between the auto iris peak
and average value.
The closer the setting is to
0, the greater the
tendency toward average
control; conversely, the
closer the setting is to
100, the greater the
tendency toward peak
control.
For selecting the auto iris
mode.
NORM1:
The light is measured for
the entire screen (except
for the edges).
NORM2:
The light is measured for
the entire screen (except
for the top part).
CENTR:
The light is measured in
the center area of the
screen only.
For setting the super iris
target level.
(Backlight compensation
mode)
For setting whether the iris
gain is to be adjusted by
the camera or lens.
For setting the iris gain
adjustment value.