Setup Menu List; Scene File Screen - Panasonic AVCCAM AG-HMC41 Operating Instructions Manual

Setup menu list

SCENE FILE screen

Display
Item
mode
FILE SELECT CAMERA
LOAD/SAVE/ CAMERA
INIT
DETAIL LEVEL CAMERA
V DETAIL CAMERA
LEVEL
DETAIL CAMERA
CORING
CHROMA CAMERA
LEVEL
CHROMA CAMERA
PHASE
COLOR TEMP CAMERA
MASTER PED CAMERA
A.IRIS LEVEL CAMERA
DRS CAMERA
GAMMA CAMERA
100
AG-HMC41E(VQT2H31(E))̲E.indb 100 AG-HMC41E(VQT2H31(E))̲E.indb 100
Description of settings
Selects the scene file.
SCENE1 SCENE2
Loads, saves, or initializes the scene file selected with FILE SELECT.
LOAD: Loads the scene file settings set on this camera.
SAVE: Saves changed scene file settings.
INIT: Returns current setting values to factory default settings.
NO: Returns to the last screen.
Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
- 7...0...+ 7
Adjusts the level of outline correction in the vertical direction.
- 7...0...+ 7
Adjusts the level of noise reduction of the detail signal.
- 7...0...+ 7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
Adjusts the chroma level.
- 7...0...+ 7
Makes fine adjustments to the chroma phase.
- 7...0...+ 7
Makes fine adjustments to the color temperature.
- 7...0...+ 7
• Enabled when presets, Ach, or Bch are configured for white balance in manual
mode.
Adjusts the master pedestal (black level of the image) as the basis for images.
- 15...0...+ 15
Sets the desired AUTO IRIS level.
- 10...0...+ 10
Selects the DRS (dynamic range stretcher) function.
It enables the dynamic range to be expanded by compressing the level of the
video signals in the high-brightness areas where overexposure results during
normal shooting.
OFF, 1, 2, 3
• The higher the number of the setting, the higher the compression level of the
high-brightness areas.
Selects the gamma curves.
HD NORM: This gamma setting is suitable for HD shooting.
LOW: Makes a mellow image using the gamma curve which has a gentle
incline in low-brightness curve. The contrast sharpens.
SD NORM: This is the normal video setting, carried over from the DVX100
series.
HIGH: Expands the tone of dark parts and makes a brighter image using the
gamma curve which has a sharp incline in low-brightness curve. The
contrast softens.
B.PRESS: Makes the contrast shaper than LOW.
CINE-LIKE D: Uses a gamma designed to create cinema-like images.
CINE-LIKE V: Uses a gamma designed to create cinema-like images with
emphasized contrast.
• When you select CINE-LIKE gamma, we recommend setting the lens aperture
lower than normal image level (approximately 1/2) for optimal results.
indicates the factory setting.
2009/07/11 18:42:26 2009/07/11 18:42:26