Super Gain Screen; Frame Mode Screen - Panasonic AJ-HDC27HP Menu Information

Setting menu screens

SUPER GAIN screen

The gain allocated to the SUPER GAIN switch is set
on this screen.
Variable
Item
range display
S. GAIN VALUE 18dB USER
24dB ENG
30dB
36dB
S C U F E
The underlining in the variable range column indicates the setting in
the preset mode.
106
FILM (CAM) MAIN MENU 2 (continued)
VF
Remarks
For selecting the gain
when the SUPER GAIN
switch is pressed.

FRAME MODE screen

The frame rate is set on this screen.
Variable
Item
range display
FRAME RATE 60-12 USER
RANGE 60-4 ENG
S C U F E
FRAME RATE USER
(CAM MENU) 60 ENG
:
(FILM MENU) 24
:
4
S C U F E
SCAN REVERSE ON USER
OFF ENG
S C U F E
USER SW 60 USER
FRAME RATE : ENG
24
:
12
S C U F E
Using the USER1 or USER2 button to switch the
frame rate
O Once the desired frame rate has been set in a
USER (USER1 or USER2) button by performing
menu operations, subjects can be shot at the set
frame rate simply by pressing the USER button.
The original frame rate is restored when the USER
button is pressed again.
O While recording is in progress, the frame rate will
not be switched even when the USER button is
pressed.
O When the frame rate has been switched using the
USER button, the switched rate will not take effect
even if one of the synchro scan switches ("+" or "– ")
is pressed after the JOG dial button is pressed.
VF
Remarks
For selecting the variable
range of the frame rate.
60-12:
60 fps to 12 fps
60-4:
60 fps to 4 fps
For setting the frame rate.
<Note>
When "60-12" has been
selected as the FRAME
RATE RANGE setting, the
frame rate cannot be set to
11 fps or below.
This function is for
correcting the images
when the prime lens is
used.
ON : The images are
corrected (by
reversing their top
and bottom and their
left and right).
OFF : The images are not
corrected.
For setting the frame rate
to be allocated to the
USER1 or USER2 button.