Panasonic AJ-HDC27HP Menu Information page 21

Setting menu screens
CAMERA SW MODE screen
Variable
Item
range display
USER1 SW USER
(FILM MENU) INH ENG
(CAM MENU) S.GAIN
S.IRIS
S.BLK
B.STR
AUDIO CH1
AUDIO CH2
REC SW
Y GET
RET SW
F.RATE
S C U F E
USER2 SW USER
(CAM MENU) INH ENG
S.GAIN
S.IRIS
S.BLK
B.STR
AUDIO CH1
AUDIO CH2
REC SW
(FILM MENU) Y GET
RET SW
F.RATE
S C U F E
<Note>
When the same function has been allocated to both the USER1
button and the USER2 button, please use the USER2 button.
The underlining in the variable range column indicates the setting in
the preset mode.
FILM (CAM) MAIN MENU 2 (continued)
VF
Remarks
For allocating the functions
in USER1 button.
<Notes>
OWhen B.STR has been
selected as this item's
setting, the function for
setting the black level
gradation compensation
to +3 is allocated.
OWhen Y GET has been
selected as this item's
setting, the function for
measuring the output
luminance level is
allocated.
The output luminance
level of the area near
the center marker in the
viewfinder is displayed
in percentage units in
the middle of the
viewfinder screen for
approximately 3
seconds.
For allocating the functions
in USER2 button.
<Notes>
OWhen B.STR has been
selected as this item's
setting, the function for
setting the black level
gradation compensation
to +3 is allocated.
OWhen Y GET has been
selected as this item's
setting, the function for
measuring the output
luminance level is
allocated.
The output luminance
level of the area near
the center marker in the
viewfinder is displayed
in percentage units in
the middle of the
viewfinder screen for
approximately 3
seconds.
Variable
Item
range display
S. BLK LVL OFF USER
–10 ENG
–20
–30
S C U F E
ECU DATA ON USER
SAVE OFF ENG
S C U F E
AUTO KNEE SW ON USER
(FILM MENU) OFF ENG
S C U F E
(CAM MENU) ON
OFF
S C U F E
VF
Remarks
For setting the super black
level.
ON : The data controlled
by the AJ-EC3
extension control
unit is stored in the
memory.
OFF : The data is not
stored in the
memory.
For setting whether the
AUTO KNEE function is to
be made operational when
the OUTPUT/AUTO KNEE
switch on the side panel
has been set to the CAM
AUTO KNEE ON position.
ON : The AUTO KNEE
function is made
operational.
OFF : The AUTO KNEE
function is not made
operational.
105