Panasonic AJ-HDC27HP Menu Information page 29

Setting menu screens
OPTION screen
Variable
Item
range display
SYSTEM FREQ. 59.94Hz ENG
60.00Hz
U F E
EVF SEL MONO ENG
COLOR
U F E
SUPER DTL ON ENG
OFF
U F E
<Notes>
OWhen the frame frequency setting has been changed, it is
necessary to restart the unit by turning the POWER switch to OFF
and then to ON again for the setting to be switched.
OWhen MONO has been selected as the EVF SEL item setting, the
marker displays are set on the VF MARKER screen of FILM
(CAM) MAIN MENU 2. When COLOR has been selected instead,
they are set using MONITOR MARKER on the VTR MAIN MENU
screen. Furthermore, when COLOR is selected, the EVF ZEBRA
and EVF DETAIL functions no longer work.
OWhen setting SUPER DTL to ON, please adjust the H.DTL
LEVEL, H.DTL FREQ and DTL CLIP values. Also, please adjust
the V.DTL LEVEL according to these values.
OItem E
will be saved regardless of the ECU DATA SAVE
setting.
The underlining in the variable range column indicates the setting in
the preset mode.
FILM (CAM) MAIN MENU 4 (continued)
VF
Remarks
For setting the unit's frame
frequency.
The EVF terminal video
signal will be switched.
MONO:
Only the Y signal is
output to the EVF
connecter.
COLOR:
The Y, Pb, and Pr
signals are output to the
EVF connecter.
Currently there is no
viewfinder to support
this.
For selecting the kind of
detail to be provided.
ON:
A stronger detail than
usual is provided.
OFF:
The same level of detail
as usual is provided.
EVALUATION screen
OS/N measurement screen
The S/N measurements are performed on this screen.
Variable
Item
range display
S/N ON ENG
DETAIL ON ENG
OFF
H-F COMPE. ON ENG
OFF
GAMMA ON ENG
OFF
MATRIX ON ENG
OFF
FLARE ON ENG
OFF
M. PED –200 ENG
:
+140
:
+200
OModulation measurement screen
The modulation measurements are performed on
this screen.
Variable
Item
range display
MODULATION ON ENG
DETAIL ON ENG
OFF
H-F COMPE. ON ENG
OFF
GAMMA ON ENG
OFF
MATRIX ON ENG
OFF
FLARE ON ENG
OFF
M. PED –200 ENG
:
(FILM MENU) +000
:
(CAM MENU) +018
:
+200
<Note>
The EVALUATION screen items are returned to their default
settings as soon as the menu is exited.
VF
Remarks
For setting the S/N
measurement.
For setting the DETAIL to
ON or OFF.
For setting the high-
frequency compensation
to ON or OFF.
For setting the GAMMA to
ON or OFF.
For setting the MATRIX to
ON or OFF.
For setting the FLARE to
ON or OFF.
For adjusting the master
pedestal level.
VF
Remarks
For setting the modulation
measurement.
For setting the DETAIL to
ON or OFF.
For setting the high-
frequency compensation
to ON or OFF.
For setting the GAMMA to
ON or OFF.
For setting the MATRIX to
ON or OFF.
For setting the FLARE to
ON or OFF.
For adjusting the master
pedestal level.
113