Setup Menu List; Scene File Screen - Panasonic AG-HVX200E Operating Instructions Manual

Setup menu list

SCENE FILE screen

Item
OPERATION TYPE
P2 TAPE
FRAME RATE
P2
SYNCRO SCAN
P2 TAPE
DETAIL LEVEL
P2 TAPE
V DETAIL LEVEL
P2 TAPE
DETAIL CORING
P2 TAPE
CHROMA LEVEL
P2 TAPE
CHROMA PHASE
P2 TAPE
COLOR TEMP
P2 TAPE
MASTER PED
P2 TAPE
A. IRIS LEVEL
P2 TAPE
NEWS GAMMA
P2 TAPE
E-99
Display
mode
(Camera) Switches the shutter and frame rate operation to the video type or film type.
VIDEO CAM: SYNCRO SCAN is displayed using 1/n units.
FILM CAM:
(Camera) Selects the shooting interval and exposure time when 720P and FILM CAM is
selected. The DEFAULT value is dependent on the frame rate of the recording
format.
DEFAULT, 12, 18, 20, 23, 25, 27, 30, 32, 37, 48, 50 FRAME
(Camera) Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
Press and hold the operation button to
When VIDEO CAM is selected as the OPERATION TYPE option setting:
• 50P/50i:
1/50.0 ... 1/248.9
• 25P/25PN:
1/25.0 ... 1/48.0 ... 1/248.9
When FILM CAM is selected as the OPERATION TYPE option setting:
The shutter speed is displayed as an angle such as "180.0d."
10.0 deg ... 180.0 deg ... 350.0 deg (the angle can be changed in increments
of 0.5 degrees)
(Camera) Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
-7...0...+7
(Camera) Adjusts the level of outline correction in the vertical direction.
-7...0...+7
(Camera) Adjusts the level of noise reduction of the detail signal.
-2...0...+7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
(Camera) Adjusts the chroma level.
-7...0...+7
(Camera) Makes fine adjustments to the chroma phase.
-7...0...+7
(Camera) Makes fine adjustments to the color temperature (after white balance
adjustment).
-7...0...+7
(Camera) Adjusts the master pedestal (black level of the image) as the basis for images.
-15...0...+15
(Camera) Sets the desired AUTO IRIS level.
-4...0...+4
(Camera) Selects the news gamma curve.
ON OFF
Description of settings
SYNCRO SCAN is displayed as an angle.
or to speed up the value changing.
indicates the factory setting.