Drain Connection - Asko DBI675IXXLS.U Operating Instructions Manual

Installation instructions
4. Adjust the front feet by turning them clockwise to raise and counterclockwise to lower the dish-
washer.
5. Verify there is an air gap of at least 1/8'' between the underside of the countertop and the top
edge of the dishwasher.
6. Slide the dishwasher into place.
• Pull the supply and drainage hoses when sliding the dishwasher into place.
• Check that the hoses have no kinks or sharp bends, and check that there is nothing that
can damage the hoses.
7. Make any final adjustments to the feet (the dishwasher may lean no more than 1/4'') and tighten
the lock nuts on the front feet.

Drain connection

This dishwasher is suitable for installing in a raised recess (to attain an ergonomic working height).
This means that the dishwasher can be placed so that the drain hose runs to a lower level than the
bottom of the dishwasher, such as by routing it directly to a floor drain. The dishwasher is fitted with
38
5/8''
1''