Table of Contents
Advertisement
Installation instructions
Transport protection for the door
Do not forget to remove the transport protection for the door when unpacking the dishwasher.
Trim kit
The dishwasher is equipped with a trim kit to fit the 24'' cutout standard. If a European width of 23
5/8'' (600 mm) is required, remove the trim kit.
Adjust the trim kit
The trim kit can be adjusted backward to level the dishwasher tub.
Placing the dishwasher
The dishwasher is intended to be built in under a countertop. The built-in measurements are shown
in the illustration. Make sure that the cord and hose hole's edges are even and will not damage the
drain and inlet hoses or the power cord.
The electrical and
water supplies
should enter
through the area
indicated by the
shading on the
illustration.
* 33 7/8'' : Remove the trim kit.
36
['']
Advertisement
Table of Contents
Troubleshooting
