Table of Contents
Advertisement
Installation instructions
Drain connection
This dishwasher is suitable for installing in a raised recess (to obtain an ergonomic working height).
This means that the dishwasher can be placed so that the drain hose runs to a lower level than the
bottom of the dishwasher, such as by routing it directly to a floor drain.
min.
1/2''
(14 mm)
Max. 37 3/8'' (950 mm)
The drain hose can also be connected to a connection nipple on the sink unit's water trap. The
connection nipple must have an internal diameter of at least 1/2'' (14 mm).
The drain hose may be extended by a maximum of 87" (2.2 m) (the total length of the drain hose
must not exceed 177" (4.5 m)). Any joints and connecting pipes must have an internal diameter of
at least 1/2'' (14 mm).
No part of the drain hose may be more than 37 3/8'' (950 mm) above the bottom of the dishwasher.
Attach the drain hose with a hose clamp. Ensure that the drain hose has no kinks.
No external air gap is necessary, as the dishwasher is already equipped with an internal air gap.
41
Advertisement
Table of Contents
