Advertisement
Overview:
Installation of arcs to begin over-head structure
assembly.
Instructions
1. Slide one 33/33mm hinged double-clamp onto each 6 10' leg, 2' in from
the swaged end (see drawing).
2. Connect 6 10' legs to 7 8' reinforced center piece to create arc
(drill in two 1 screws at the unions to hold tubes together).
3. With one person on each side, insert one end at a time
and continue until all arc sets are installed onto 13 platforms.
1
sds screws
6
10' leg section (pairs)(9)
7
8' reinforced center (9)
13 platform post
22 33/33mm hinged double clamp (18)
Advertisement
