Advertisement
Overview:
Attaching film to create roll-up sidewalls. Be sure
to tape all corners and possible sharp edges before
attaching film to prevent puncturing.
Instructions
1. Begin by leaving 12" of film sticking outwards
past the sides, and 4" upwards past the top of the channel.
2. Use 27 wiggle wire to lock film inside 28 aluminum channel.
3. Wrap up the bottom excess film to the roll-up arms assembled
in a previous step (page 11).
4. Do this for both sides.
5
27
28
6'x100' tarp clear
wiggle wire (16)
aluminum channel
Advertisement
