Overview:
Attaching film to create ceiling cover.
Instructions
1. Lay film over the cold frame.
2. Attach film to the last hoop (locking film into 28 aluminum
channel with 27 wiggle wire).
3. Pull the front very tight and lock film into the front hoop's
28 aluminum channel (film must be put on tightly to
prevent flapping which can cause potential tearing).
4. Trim excess film that hangs over the front and back of cold
frame (leave 6" of excess flap).
27
28
29
wiggle wire (8)
aluminum channel
super premium film (1)