Advertisement
Overview:
Attaching film to cover the front and back sides.
Instructions
1. Measure the height (x) of the cold frame and add two feet
to that distance (x+2').
2. Using the remainder of the 29 film, cut two sheets to be 32' wide
(assuming your roll of film is 32' wide) by x'+2' long (i.e. if the
cold frame height is 13', your sheet should be 32'x15').
3. Center the sheet and lock film into 28 aluminum channels with
12" of film going upwards past the top and 12" downwards past
bottom of 28 aluminum channel.
4. Do for front and back sides of cold frame.
27
wiggle wire (28)
28
aluminum channel
29
super premium film
Advertisement
