Table of Contents
Advertisement
Making calls
Using the handset
1
Lift the handset and dial the phone
number.
L To correct a digit, press {CLEAR}.
2
{C}
L An available line is automatically
selected and the line number is
displayed.
3
When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
L You can also select a line by pressing
{LINE1} or {LINE2} in step 2.
L To change the line selection, see page
46.
L While on a call, you can switch from the
handset to the base unit or another
handset by:
– pressing {LINE1} or {LINE2} twice on
the base unit.
– pressing {LINE1} or {LINE2} twice on
another handset.
Using the speakerphone
1
Lift the handset, dial the phone number,
and press {s}.
L Speak alternately with the other party.
For assistance, please visit http://www.panasonic.com/phonehelp
Y
Making/Answering Calls
C
2
When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
L Use the speakerphone in a quiet
environment.
L To switch to the receiver, press {C}.
Adjusting the receiver/speaker volume
Push {^} or {V} while talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list.
1
{REDIAL}
2
Push {^} or {V} to select the desired
number.
L To erase the displayed number, press
{CLEAR}.
3
{C}
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service. When storing a calling card
access number and/or PIN in the
phonebook, a pause is also needed (page
27).
For example, if you need to dial the line
access number "9" when making outside
calls with a PBX:
1
{9} i {PAUSE} i Dial the phone
number.
2
{C}
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
21
Advertisement
Table of Contents
