Table of Contents
Advertisement
Quick Links
TH112_QG(e).fm Page 1 Monday, June 5, 2006 3:25 PM
Quick Guide
Setting up
Connect the included telephone line cord depending on your situation.
To connect to a 2-line telephone jack
Base unit
To connect to 2 single-line telephone jacks
Base unit
2-wire telephone line cord
with transparent plugs
If you subscribe to a DSL service, connect a noise filter to the telephone line between the
base unit and the telephone line jack. Refer to the operating instructions for connections.
For further information, visit http://www.panasonic.com/phonehelp
"Click"
4-wire telephone line cord with green plugs
"Click"
4-wire telephone line cord
with green plugs
To single-line telephone jacks (RJ11C)
KX-TH112
Model No.
To 2-line telephone
jack (RJ14C)
Line 2
Line 1
Continue page 2.
PQQW15222ZA
DM0506MK0
Advertisement
Table of Contents
Related Manuals for Panasonic KX-TH112
Summary of Contents for Panasonic KX-TH112
-
Page 1: Quick Guide
Continue page 2. If you subscribe to a DSL service, connect a noise filter to the telephone line between the base unit and the telephone line jack. Refer to the operating instructions for connections. For further information, visit http://www.panasonic.com/phonehelp PQQW15222ZA DM0506MK0... - Page 2 TH112_QG(e).fm Page 2 Monday, June 5, 2006 3:25 PM Continued Setting up Base unit Use only the included Panasonic AC adaptor PQLV206. Hook (120 V AC,60 Hz) Press plug firmly. Handset CHARGE 6 HOURS Confirm the charge indicator is on.
-
Page 3: Operating Tips
{SELECT}, {SAVE}, {OK} and additional other functions are assigned to soft keys. Pay attention to soft keys to find functions you need during handset operation. For further information, visit http://www.panasonic.com/phonehelp or refer to Operating Instructions. – –... - Page 4 {MENU} (center of joystick) i {#}{1}{6}{0} Select the desired line. Select the desired volume. i {SAVE} i {OFF} Answering call-waiting Press {CALL WAIT} when you hear call waiting tone. call (2nd call) For further information, visit http://www.panasonic.com/phonehelp or refer to Operating Instructions. – –...
- Page 5 (Default remote code is “11”.) L The unit plays back new messages including memo messages. L After playing back new messages, the voice guidance starts. Follow the voice guidance as necessary. For further information, visit http://www.panasonic.com/phonehelp or refer to Operating Instructions. – –...
-
Page 6: Frequently Asked Questions
There is no damage to the battery. How can I answer a call- L Press {CALL WAIT} when you hear call-waiting tone. waiting call (2nd call)? For further troubleshooting information, visit http://www.panasonic.com/phonehelp or refer to Operating Instructions. – –... -
Page 7: Quick Troubleshooting
AC adaptor and insert the battery into the handset again. Try re- registration as explained later in this guide. Re-registration failed. Your telephone may need service. For further troubleshooting, please visit http://www.panasonic.com/phonehelp – –... - Page 8 Still no dial tone Your telephone may need service. Please visit http://www.panasonic.com/phonehelp for further troubleshooting. – –...
- Page 9 Press and hold {INTERCOM} until the IN USE indicator flashes. Complete next step within 2 minutes. Handset Press {OK} (right soft key). Press and hold INTERCOM on base unit for sec. Then press BACK {OK} For further registration information, visit http://www.panasonic.com/RegisterYourHandset – –...
- Page 10 L FAQs and troubleshooting hints are available. 3 Contact us via the web at: http://www.panasonic.com/contactinfo 4 Call us at: 1-800-211-PANA (1-800-211-7262) L Monday - Friday 9:00am - 9:00pm (EST), Saturday/Sunday 10:00am - 7:00pm (EST) To order a replacement battery, please call: 1-800-332-5368 Or visit: http://www.panasonic.com/batterystore...