Table of Contents
Advertisement
Programmable Settings
– "TAD (cell)" (Answering system for
cellular phone, page 65): "Off"
– "TAD ring count" (Ring count of
answering system for cellular phone,
page 66): "4 rings"
Customer support
The handset and base unit can display the
Internet address where you can download
the operating instructions or get further
information for this product using your
computer.
Handset
1
{MENU} (center of joystick) i h i
{SELECT}
2
"Customer support" i {SELECT}
L The Internet address is displayed.
3
{OFF}
Base unit
1
{MENU} i h i {SET}
2
"Customer support" i {SET}
L The Internet address is displayed.
3
{STOP}
48
For assistance, please visit http://www.panasonic.com/phonehelp
^
Y
Registering a unit
Registering the handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base unit,
register the handset.
Important:
L Before registering a compatible
Panasonic handset to the base unit, we
recommend you change the PIN (page
47) so that other Bluetooth devices in
the area are not accidentally registered
at the same time.
L If you have already canceled the
handset registration at the previous
base unit, perform steps 2 and 3 only.
1
Handset:
{MENU} (center of joystick) i h i
{SELECT} i "Registration" i
{SELECT} i "Registration" i
{SELECT}
2
Base unit:
Press and hold {INTERCOM} until the
IN USE indicator flashes.
L After the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 2 minutes.
3
Handset:
Press {OK}, then wait until a beep
sounds.
L If you have changed the PIN, enter it
and press {OK}, then wait until the
handset beeps.
^
Y
Advertisement
Table of Contents
