Table of Contents
Advertisement
Programmable Settings
Setting telephone line
Line selection
The line selection mode determines which
line is selected when you press {C} on
the handset or {SP-PHONE} on the base
unit.
– "Auto": When making a call, line 1 is
selected. If that line is unavailable, line 2
is selected. When answering a call, the
ringing line is selected.
– "Line1": Line 1 is selected.
– "Line2": Line 2 is selected.
Handset
1
{MENU} (center of joystick) i h i
{SELECT}
2
"Set tel line" i {SELECT}
3
"Line select" i {SELECT}
4
Select the desired setting. (Default:
"Auto") i {SAVE} i {OFF}
Note:
L You can select a line manually
regardless of the line selection mode by
pressing {LINE1} or {LINE2}.
Base unit
1
{MENU} i h i {SET}
2
"Set tel line" i {SET}
3
"Line select" i {SET}
4
Select the desired setting. (Default:
"Auto") i {SET} i {STOP}
Note:
L You can select a line manually
regardless of the line selection mode by
pressing {LINE1} or {LINE2}.
46
For assistance, please visit http://www.panasonic.com/phonehelp
Flash time
^
Y
The flash time depends on your telephone
exchange or host PBX.
L You only need to program this setting
Important:
L The setting should stay at 700 ms unless
1
2
3
4
5
1
2
3
4
5
Note for handset and base unit:
L If the unit is connected via a PBX, certain
once, using either the handset or base
unit.
pressing {FLASH} fails to pick up the
Call Waiting call.
Handset
{MENU} (center of joystick) i h i
{SELECT}
"Set tel line" i {SELECT}
"Set flash time" i {SELECT}
Select the desired line.
Select the desired setting. (Default:
"700ms") i {SAVE} i {OFF}
Base unit
{MENU} i h i {SET}
"Set tel line" i {SET}
"Set flash time" i {SET}
Select the desired line.
Select the desired setting. (Default:
"700ms") i {SET} i {STOP}
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Advertisement
Table of Contents
