Panasonic KX-TH112 Operating Instructions Manual page 47

2-line expandable digital cordless answering system
Hide thumbs Also See for KX-TH112:
Table of Contents

Advertisement

Line mode
Generally, the line mode setting should not
be adjusted.
When another phone connected to the
same line is in use, and
– if k or l is not displayed on the
handset, or
– if {LINE1} or {LINE2} button light is off
on the base unit,
you need to change the line mode to "A".
L You only need to program this setting
once, using either the handset or base
unit.
Handset
1
{MENU} (center of joystick) i h i
{SELECT}
2
"Set tel line" i {SELECT}
3
"Set line mode" i {SELECT}
4
Select the desired line.
5
Select the desired setting. (Default: "B")
i {SAVE} i {OFF}
Base unit
1
{MENU} i h i {SET}
2
"Set tel line" i {SET}
3
"Set line mode" i {SET}
4
Select the desired line.
5
Select the desired setting. (Default: "B")
i {SET} i {STOP}
For assistance, please visit http://www.panasonic.com/phonehelp
Programmable Settings
Changing the PIN (personal
identification number) ^
For security, the PIN must be entered
when changing certain settings such as
registering units. The default setting is
"7262".
Important:
L If you change the PIN, please make note
of your new PIN. The unit does not
reveal the PIN to you.
1
{MENU} i h i {SET}
2
"Set PIN" i {SET}
3
To change the PIN for the first time, skip
to step 4.
To change the PIN, enter the current 4-
digit PIN. i {SET}
4
Enter the new 4-digit PIN. i {SET}
5
Enter the new 4-digit PIN again. i
{SET} i {STOP}
If you forget the PIN (resetting the base
unit to its default settings)
If you set the PIN and you cannot
remember it, you can reset the base unit
using the following procedures.
Base unit:
{MENU} i {MUTE} i
{#}{9}{0}{0}{0}
Note:
L The following items are reset to their
default settings:
– Settings indicated by "*2" in the
feature column on page 87
– Answering system: On
– Line selection for answering system:
Line 1 and line 2
L If you have registered a cellular phone,
the following cellular phone settings are
also reset to their default settings.
– "Assign Base/HS" (Allows you to
select which unit to ring for cellular
calls, page 65): "All"
47

Advertisement

Table of Contents
loading

Table of Contents