Electromagnetic Fields (Emf) - Philips Avent SCF358 User Manual

- The use of accessory attachments not recommended by the
appliance manufacturer may cause injuries.
- To disconnect, turn any control to "off", then remove plug from
wall outlet.
- Before serving be sure food is at safe temperature.
- Before serving, unplug cord form wall outlet and dish. Do not
leave cord within child's reach.
Caution
- This appliance is intended for use in household.
- The food should not be heated for too long.
- Always check the food temperature before you feed your
child. Gently swirl the bottle and check by sprinkling a few
drops on the inside of your wrist. (Follow the instructions in
section ''Feed your baby the milk''.)
- Unplug the appliance when it is not in use.
- The surface of the heating element is subject to residual heat
after use.
- Let the appliance cool down before you clean it.
- Follow the descaling instructions to avoid irreparable damage.
- Do not try to open or repair the appliance yourself.
Contact the Philips Consumer Care Center in your country
(see www.philips.com/support).
SAVE THESE INSTRUCTIONS
The production date code YYWW is located in the cord storage compartment in the base
of the bottle warmer�

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding
exposure to electromagnetic fields.
- 5 -