Contents IMPORTANT SAFEGUARDS ��������������������������������������������������������������������������������������������� 3 Electromagnetic fields (EMF) �������������������������������������������������������������������������������������������� 5 Introduction ����������������������������������������������������������������������������������������������������������������������� 6 Instructions for use ���������������������������������������������������������������������������������������������������������� 7 Product overview ����������������������������������������������������������������������������������������������������������������� 7 Explanation of settings ������������������������������������������������������������������������������������������������������� 8 Warm milk ������������������������������������������������������������������������������������������������������������������������������ 9 Feed your baby the milk ���������������������������������������������������������������������������������������������������10 Reuse the bottle warmer right away for another bottle �����������������������������������������11 Warm milk bag �������������������������������������������������������������������������������������������������������������������12 Warm baby food ����������������������������������������������������������������������������������������������������������������13 Feed your baby the baby food ���������������������������������������������������������������������������������������15...
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: Read all instructions. Danger - To protect against electrical shock, do not immerse the cord, plug or appliance in water or other liquid� Warning - Only use the appliance indoors.
Page 4
- Do not use the appliance if the plug, the power cord or the appliance itself is damaged. If the power cord is damaged, you must have it replaced by Philips, a Philips authorized service center or similarly qualified persons in order to avoid a hazard.
The production date code YYWW is located in the cord storage compartment in the base of the bottle warmer� Electromagnetic fields (EMF) This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields. - 5 -...
Congratulations on your purchase and welcome to Philips Avent! To fully benefit from the support that Philips Avent offers, register your product at www.philips.com/welcome� With this bottle warmer, you can warm and defrost milk in Philips Avent and other most common branded feeding bottles and baby food in containers.
Explanation of settings • Select this setting to warm milk of room temperature or fridge temperature. • Select the milk volume you warm. You can set from 30 ml / 1 oz up to 330 ml / 11 oz. The bottle warmer warms the milk to the desired temperature.
Warm milk Place the bottle in the bottle warmer� Fill with drinking water to the level of the milk. If you have a large volume of milk, e.g. 210 ml/ 7 oz, fill with water to approximately 1 cm below the top of the bottle warmer. 1 cm Select the desired setting based on the milk volume and press the on / off button to switch on�...
• If you want the milk warmer, keep the bottle in the appliance until it reaches the desired temperature after the entire progress indicator lights up. • If you are using a silicone bottle, it takes longer to warm milk. Keep it in the bottle warmer for 3-4 minutes after the entire progress indicator lights up.
Always check the temperature of the milk before you feed your baby. Gently swirl the bottle and check by sprinkling a few drops on the inside of your wrist. After each use, unplug the bottle warmer and let it cool down. Remove the water from the bottle warmer for hygienic reasons.
Warm milk bag Check the instructions of your milk bag and make sure it can be warmed in a bottle warmer. Place the milk bag in the bottle warmer� Fill with drinking water to the level of the milk. If you have a large volume of milk, fill with water to approximately 1cm below the top of the bottle warmer�...
The bottle warmer switches off automatically after about 60 minutes, including warming time. The progress indicator turns off. 60 min Warm baby food Place the baby food container in the bottle warmer� Fill with drinking water to the level of the baby food. If you have a large volume of baby food, e.g. 210 ml/ 7 oz, fill with water to approximately 1 cm below the top of the bottle warmer.
Page 14
Due to variations in baby food consistency, it is not possible for the appliance to detect precisely how long the baby food should be warmed� Stir the baby food while the jar or container is in the bottle warmer� For optimal result, check its temperature while it is warming up�...
Feed your baby the baby food Press the on / off button to switch off the appliance and take out the food container or jar. Always check the temperature of the baby food before you feed your baby� Gently stir the baby food in the food container or jar and taste it to make sure it is not too hot�...
Page 16
Select the keep warm / defrost setting and press the on / off button to switch on. The progress indicator flashes to show that milk is warming. When the entire progress indicator lights up continuously, the milk is ready for feeding and the bottle warmer keeps the milk at this temperature�...
Defrost milk With this setting, the built-in sensor adjusts the heating pattern for keep warm or defrost. If you put frozen milk, the bottle warmer defrosts the milk to liquid state and then warms it to the right temperature. You can defrost the milk from 30 ml/ 1 oz up to 180 ml/ 6 oz. Place the bottle in the bottle warmer�...
The bottle warmer switches off automatically after about 60 minutes, including defrosting and warming time. The progress indicator turns off. 60 min Defrost baby food With this setting, the built-in sensor adjusts the heating pattern for keep warm or defrost. If you put frozen baby food, the bottle warmer defrosts the baby food.
Page 19
Note • E.g. to defrost a jar of 180 ml/ 6 oz frozen baby food, it will take 60 minutes. The defrosting time may be longer or shorter depends on the baby food volumes and container material. The bottle warmer switches off automatically after about 60 minutes. The progress indicator turns off.
Due to variations in baby food consistency, it is not possible for the appliance to detect precisely how long it should be warmed� Stir the baby food while warming� For optimal result, check its temperature while it is warming up� Be careful not to burn your fingers when holding the container or jar while stirring.
Wipe with a moist cloth� » Do not use abrasive, antibacterial cleaning agents, chemical solvents or sharp tools to clean the bottle warmer� Note • If you used the bottle warmer to warm baby food, make sure that no spilled baby food remains at the bottom of the bottle warmer.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. For recycling information, please contact your local waste management facilities or visit www.recycle.philips.com. Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance.
Page 23
Problem The milk is still cold. • You may have selected an incorrect setting, are using a silicone bottle, or Cause have filled the bottle warmer with warm water. • You may have not filled enough water in the bottle warmer. •...
Damage occurring during shipment is not covered by this warranty. NOTE: No other warranty, written or oral, is authorized by Philips North America LLC. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Need help?
Do you have a question about the Avent SCF358 and is the answer not in the manual?
Questions and answers