7 MQMAS METHOD
2.
Close the window after performing phase correction of the F2 axis.
The phase of the F2 axis is applied to nD Processor.
3.
Cut the value of the phase of the F2 axis as follows.
Highlight the phase: -- : -- : -- line , and press the Cut
4.
Click the Open Process List
The process list to load is different for every nuclear spin number of the measure-
ment nucleus and measuring quantum number of the measurement method.
For nuclear spins 3/2:
For nuclear spins 5/2 and excitation 3 quantum:
For nuclear spins 5/2 and excitation 5 quantum:
7-10
button to load the process list of MQMAS.
3s3qmas.list
5s3qmas.list
5s5qmas.list
button.
NMECAXS_V50-SLD-2